四头注液泵简述（Injection Pump Introduction）： 

本公司现有注液泵分为以下几种规格，泵体陶瓷柱塞有16型，19型，和32型三种规格，16型单圈注液量为0-3.5克，19型为0-4.5克，32型为0-20克，（以上注液量以水为标准侧试，其它液体的比重一样注液量也不样）；是提高效率，节省设备成本的不二之选。

注液泵有1头和多头供客户选择，最多一台泵可带6个注液头。多头泵为共同调节注液量，只用调动调节螺母，多个头一起动作，注液量为统一注液量，每个注液头的注液量精度偏差≤0.02克，适用于多头多点同时注液。

There are 3 types of ceramic injection pump, type 16, type 19 and type 32. The injection volume for type 16 is 0-3.5g under 1 resolution, 0-4.5g for type 19 and 0-20g for type 32. (Please note that the weight was tested with water, for other liquid if the density is same as water, the weight will be the same.) This pump is the best solution for improving efficiency and reduce equipment budget.

There are single pumps or multiple pump (up to 6) set up available for customer to choose from. In a multiple pump set up, the injection quantities in all the pumps can be adjusted with a single adjustment knob. The injection accuracies for each pump is ≤0.02g. This set up is useful for multi-point injection.

主要技术参数：